Self piercing rivet gun10/25/2022 ![]() ![]()
Steck’s new SPR Insertion Tool is a high-grade, hardened steel frame, that uses a 1/2” 20 grade 8 hex bolt, with a magnetic end and center recess to hold the replacement SPR, while inserting it with your 3/4” or 19mm socket using your 1/2” impact wrench.ġ) Technician locates a spot on the flange area, next to the SPR you just removed (after you have replaced the door skin or quarter panel.Ģ) Insert the new SPR on the magnetic end of the bolt, hand tighten to the flange area keeping the body of the tool against the door flange.ģ) Install your 3/4” or 19mm socket to your 1/2” impact wrench and engage.Ĥ) Within 3-5 seconds you will see the old SPR come out from the bottom.ĥ) Install rope hem on door skin using the AI Skin Zipper (PN 21892) and the window flange with the AI Skin Zipper 2 (PN 21896) or other tools according to manufacturers instructions.The 125mm extension arm is sold separately. Included with the CH-SPR-5 is the standard 55mm arm. ![]() You can use the dies with the kit and it works with may other styles of dies from other manufactuers.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |